Is your oven not heating up properly? It might be time to replace the bake element. Don't worry, with these 3 easy steps, you can do it yourself without calling a professional. Let's get started!
Step 1: Safety First
Before you begin, make sure to turn off the power to your oven by unplugging it or switching off the circuit breaker. This will prevent any accidents while you work on replacing the bake element. It's also a good idea to wear gloves to protect your hands from any sharp edges.
Step 2: Remove the Old Bake Element
Locate the bake element in your oven. It is usually at the bottom of the oven and looks like a metal coil. Using a screwdriver, carefully remove the screws that secure the bake element to the oven walls. Gently pull the bake element towards you to expose the wires connected to it. Take note of how the wires are connected before removing them to ensure you can reconnect the new bake element correctly.
Step 3: Install the New Bake Element
Take your new bake element and reconnect the wires in the same way they were connected to the old element. Carefully push the bake element back into place and secure it with the screws. Once the new bake element is securely in place, restore power to your oven and test it to make sure it is heating up properly. Congratulations, you have successfully replaced your oven's bake element!
By following these 3 simple steps, you can save time and money by replacing your oven's bake element on your own. Remember to always prioritize safety and double-check your work before using your oven again. If you have any doubts or concerns, don't hesitate to contact a professional for assistance. Happy baking!